How To Repair Joy Con Analog Stick
Repair guide : Analog joystick Right Joy-Con
Level : Hard Time : 40 min Writer : Alexandre
1960 people take done this repair successfully ! Why not you?
Despite the numerous advantages of the analog joystick on your Right Joy-Con, information technology can quickly intermission or jam, causing issues when you're playing games. This can become very wearisome during games... Merely don't worry, cheers to our repair guide, you can rediscover a like new Joy Con! Only follow our detailed steps so you lot tin refurbish your controller yourself in a blink of an eye!
Problems:
- Joystick jammed in one direction
- Joystick doesn't react, or doesn't react well to movements
Some advice earlier y'all start
Recommended repair kit
Pace i
Unscrew the four screws circled in ruby-red that secure the rear case of the Joy-Con with a Tri-wing screwdriver.
Step 2
Insert the nylon spudger between the front and back instance.
Advisedly lever up the spudger to split the two parts.
Footstep iii
Use the signal of the nylon spudger to gently lever upward the battery connector in order to disconnect information technology from the controller.
Step 4
Insert the nylon spudger between the console and the battery and advisedly lever it up to disconnect the battery.
Now grasp the bombardment and remove information technology from the controller.
The battery in the right Joy-Con is at present removed.
Footstep 5
Disconnect the vibrator connector cable using the nylon spudger.
Step six
Disconnect the vibrator from the rear case using the nylon spudger.
At present remove it advisedly.
Step seven
Disconnect the antenna from the motherboard with the point of the nylon spudger.
Grasp the antenna then remove it.
The antenna in the Right Joy-Con is now removed.
Footstep 8
Unscrew the two screws circled in ruby-red using a i.5mm cross-headed screwdriver, found in our standard tool kit.
These screws secure the battery back up/ZR button.
Step nine
Now grasp the button and the back up and slide information technology to the right.
Step 10
Now utilise the nylon spudger to unlock the ZR push cable.
Now remove the cable from its connector.
Now grasp the bracket and remove information technology.
Stride 11
The ZR push in the RightJoy-Con is now removed.
You can at present replace it with a new button if necessary.
Pace 12
Apply the signal of the nylon spudger to disconnect the rear case connector cable on the correct.
Step 13
Now practice the aforementioned for the left connector cable, disconnecting information technology as well.
Step xiv
The rear case on your right Joy-Con is now removed.
Step 15
Use the point of the nylon spudger to unlock the latch for the joystick cable connector.
Step sixteen
Use the cantankerous headed screwdriver again to unscrew the 2 screws circled in red. These screws secure the analog joystick.
Stride 17
Grasp the joystick and so remove information technology.
Stride 18
The analog joystick in your Right Joy-Con is now removed.
Yous can now replace it with a new joystick if necessary.
Recommended repair kit
Source: https://www.sosav.com/guides/game-consoles/nintendo/nintendo-accessories/joycon-right/analog-joystick/
Posted by: richardsonadvat1977.blogspot.com
0 Response to "How To Repair Joy Con Analog Stick"
Post a Comment